So I asked around in #eoff and some people were interested in learning how I do colored illustrations like this:
1604587_10202606167988933_1425846737_n.jpg
Basically I use alcohol based markers to lay down base colors, then I use colored pencils to blend. I also do a lot of prep-work so I don't end up with erased lines, scratches ect. As a disclaimer, I will say...you dont HAVE to use the same brands of supplies that I do! I encourage everyone to find things that work for them (I just happen to have prismacolor markers so that's what i use. They are expensive, and they might be out of some peoples' budget!) So if you're curious about my methods, then read on!



STEP 1: BASIC SKETCHING/PREPPING

ChronoCoasters002.jpg

The first thing I do is sketch out what I want to draw on graph paper, though any kind of scrap parer will do. I'm literally using it because it's been sitting around doing nothing since I dropped out of college 9 or 10 years ago.


ChronoCoasters006.jpg
Now I just outline the lines I want to show up through tracing paper!

ChronoCoasters007.jpg
Next I tape down my tracing/marker paper so it doesn't move all over the place while I'm drawing. I use masking tape because it'll peel off easily when I'm finished. I also VERY LIGHTLY trace over the dark lines I made earlier. I have a very nasty habit of drawing with too much pressure and then I end up with dents in my paper. That's why i actually started doing all of this prep work. It seems like a lot but it's worth it (to me anyway!).



STEP 2: COLORING WITH MARKERS

So, like I mentioned earlier, I use Prismacolor art markers. They're meant for professional use so they can be kind of pricey. I'm not sure if there's a cheaper alternative out there or not. I can say that an alcohol-based marker will work best and you'll want a wide variety of colors because almost everything gets colored in with at least 2 colors; a base and a shade. That's what will give objects and things more dimension. Let me show you what I mean!

ChronoCoasters009.jpg
First, I like to lay down my shade color/shadows. It might be helpful to either look at something, whether it's another drawing (that's what I was doing here, because fan art) or objects in reality to help you figure out where exactly shadows are going to fall.

ChronoCoasters010.jpg
There we go! Now that that's done we'll be laying down the base color!

ChronoCoasters011.jpg
When laying down the base color, I usually color over the shade color too. That's what helps things blend together seamlessly. If you stop coloring where the shadows start you'll end up with lines, and unless that's the look you're going for, you don't want that!

ChronoCoasters012.jpg
Here's what you should end up with. Also, if you make mistakes while coloring in marker, don't worry about it! I accidentally colored over Crono's eyebrow with a skin-color shade here. I was able to fix it with colored pencils!

ChronoCoasters018.jpg
Here's what everything looks like after I'm done with markers. I almost could have left it at this for something a bit more stylized if I would have been a bit neater with marker. I also usually only use 2 colors (shade and base) but you can use 3 to 4, or even more than that for a more 3D effect.

ChronoCoasters019.jpg
And now, my personal favorite part, I'll be putting down line work. The pen I'm using is a pigment liner; it uses archival ink and wont fade or smudge. I like to do thicker lines around the outline of my characters...no particular reason why, i just like how it looks. You could stop here if you wanted for a more "anime" look. If you want to render and smooth things out more, that read on!





STEP 3: RENDERING WITH COLORED PENCILS

THIS IS WHERE THE MAGIC HAPPENS

ChronoCoasters020.jpg
I will once again be using 2 colors, a shadow and a base.

ChronoCoasters022.jpg
First, I color in the main color. Be sure to leave some areas untouched for highlights! Just like with shadows I recommend having something to look at for reference on where shadows and highlights should go.

ChronoCoasters029.jpg
Now I'm adding in shadows.

ChronoCoasters025.jpg
(SORRY FOR THE CRAP PHOTO, COLORING AND TAKING A PICTURE AT THE SAME TIME IS HARD, K?) Then I add in highlights with white. At this point i just keep coloring and layering until I get the desired blended effect. A lot of the blending is done with your main color. I also use quite a bit of pressure with colored pencils. I want those colors to be really saturated and bold!





STEP 4: FINISHING TOUCHES

Things are starting to really come together now! I can't even explain how excited i was by now, and if I would have smurfed up at this point I probably would have just quit life.

ChronoCoasters031.jpg
Here I'm using a white gel pen to add in more harsh highlights (anything that's shiny!) and correcting anything that needs to be corrected, like marker bleeding into an area that's supposed to be white, cleaning up any inking, ect. This gel pen doesn't work all that great over colored pencil though and you can use just about anything white to go over it (White-out, white acrylic paint, ect). This is also a good time to do any final blending and any other final touches that need to be made.

10374905_10203278920967337_1144758483277397680_n.jpg
And with that all said, we're done! I know this is a really long and picture heavy tutorial, but I really hope someone learns something from it! Should I make more? Do you have any questions? Any feedback is welcome, since I've never written out anything like this before. It's very late now, so I think I'll take my leave. Happy artinating fellow EOFF'ers!