Results 1 to 8 of 8

Thread: Damn modem *kicks tower*

  1. #1

    Default Damn modem *kicks tower*

    My modem which usually connects at about 46-49 kbps. Well usually after my phoneline gets reconnected, after a thunderstorm, or after we get the phone worked on outside my connection drops to about 9.1 kbps and its accompanied by this annoying buzzing sound my modem makes when it connects, I know it makes an annoying buzzing noise when it connects normally but the default noise is accompanied by another buzzing noise. Im sure it will get better in time, oh and reconnecting and changing connection numbers wont change it, but how can I stop it from happening again?

  2. #2
    Hypnotising you crono_logical's Avatar
    Join Date
    May 2001
    Location
    Back in Time
    Posts
    9,313
    Contributions
    • Former Administrator
    • Former Cid's Knight

    Default

    Sounds like something is interfering on the line straight after those things happen, hence it can't connect any faster without data loss, so changing where you dial to is not going to help. Not sure where to go from there, since this seems to be mostly out of your control
    Problems playing downloaded videos? Try CCCP


  3. #3
    Your very own Pikachu! Banned Peegee's Avatar
    Join Date
    Mar 2001
    Posts
    19,488
    Blog Entries
    81

    Grin

    using analog lines for data transfer is fundamentally limited due to a lot of factors, some of which I will list out:

    -noise
    -electromagnetic interference
    -obselete cabling
    -bad connectivity
    -anything and everything else

    So basically clout's right when he says it's out of your hands. If the speed is restored in time to 46-49kbps (which is pretty darn good speeds considering) in time, then I don't see a reason why it should be obselete cabling. I think it's more of the first reason more than anything *nod*.

    I am not 100% sure whether analog/voice cables have anything better than category 3 going on with them, but as far as I know, if they don't (which I think), the cable lacks anti-magnetic measures, and thus, it's more than likely that it's electromagnetic-interference related. Why it fails when you 'reconnect' is beyond me, and I'm definitely confused over the 'getting the phone worked on outside'

  4. #4

    Default

    Wow... Clout has.. no answer..... I think Im gonna faint.

  5. #5
    Hypnotising you crono_logical's Avatar
    Join Date
    May 2001
    Location
    Back in Time
    Posts
    9,313
    Contributions
    • Former Administrator
    • Former Cid's Knight

    Default

    I never said I knew everything
    Problems playing downloaded videos? Try CCCP


  6. #6
    Your very own Pikachu! Banned Peegee's Avatar
    Join Date
    Mar 2001
    Posts
    19,488
    Blog Entries
    81

    Grin

    Clout is amazing when it comes to computer stuff. However your question is specific to data communications technologies and topologies (well not topologies, but I wanted to write it in there).

    ^_^

  7. #7

    Default

    Uhhh.... I doubt internet connectivity AKA a WAN has a topoligy.

  8. #8
    Your very own Pikachu! Banned Peegee's Avatar
    Join Date
    Mar 2001
    Posts
    19,488
    Blog Entries
    81

    Grin

    From memory topology is the wire routing, connection points, and..er...termination. The stuff you mentioned about the 'WAN' (you mean the telephone cables all around town?) don't really apply IMO. They might, but it would still be irrelevant.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •